---
title: "Link controls and investigate residual challenges"
description: "Compare the recorded residual position with current control evidence."
url: https://helpcenter.complytrain.net/en/articles/138-link-controls-and-investigate-residual-challenges
collection: "Register and risk records"
updated: 2026-09-22
language: en
---

# Link controls and investigate residual challenges

Compare the recorded residual position with current control evidence.

Compare the recorded residual position with current control evidence.

## Link the actual controls

Product location: `/rms/risks/{riskId}` (fallback: `/rms/risks`). Open the intended risk and the panel described below.

Open the risk's **Controls**, choose **Link a control** and select a control that mitigates this risk. Record the percentage of exposure it covers, its relative weight and the rationale for the link.

A weight of zero retains a noted control without letting it affect the aggregate. An untested or stale control can leave effectiveness unknown. Retired controls remain visible but stop counting.

![The residual assessment uses controls already operating. This scoring note is not saved as a control record.](https://staticfiles.gleap.io/p6950dfbf97796f2087a9f022/KpJxz8ekRD1wiZ6zxHbyqhDskOH3dsXcgoSS0ltklL0pz2RtFk5qmlyKmtvhAwCXE1B1VDpEFkX.png "Explain the current controls")

## Interpret the challenge

Product location: `/rms/risks/{riskId}` (fallback: `/rms/risks`). Open the intended risk and the panel described below.

Open **Residual vs controls** to compare **Recorded** and **Supported by controls**. The result can be supported, not supported, evidence has slipped or cannot be checked. Inspect the stated reason and tolerance rather than interpreting every difference as the same problem.

When a methodology's **Residual scoring** mode is **Derived from controls**, the residual score is calculated nightly from control effectiveness and cannot be entered by hand. See [choose how residual scores are set](https://help.complytrain.net/en/rms/configure-risk-management/#choose-how-residual-scores-are-set).

## Record a decision

Product location: `/rms/risks/residual-challenges`. Open the relevant residual challenge.

If the recorded residual remains justified by information outside the linked controls, use **The recorded residual stands** and explain that reasoning. The acknowledgement concerns the current disagreement; changed scores or controls can raise it again.

The **Residual challenges** register is based on a nightly check. Open a risk for its current position. If a control stopped operating, retire it rather than unlinking it merely to hide the effect. Unlinking is appropriate when the control does not mitigate this risk.
